Flathead screw is specially made for use in particleboard. The special nibs formed into the underside of the head cuts a clean recess for the head as it is torqued down. Also has steep pitched wide spaced threads that are required for a good bite into particleboard.
Available in: Phillips or Square Drive. Black Oxide, Zinc or Yellow Zinc plating.
 Coarsely threaded Bugle Head screw has specially angled, wide spaced threads for positive grip that eliminates gouging or “Spin-out” in particleboard.
Available In: Phillips or Square Drive. Black Oxide plating.

Same as “Sinker” but with a type 17 (auger) point.
Available In: Phillips or Square Drive. Black Oxide or Zinc plating.		 The perfect screw for attaching drawer fronts. An oversize washer head with partial threading allows for easy adjusting. Deep, wide spaced, angled threads and Type 17(auger) point, make this screw ideal for particleboard, MDF and soft wood.
Available In: Phillips or Square Drive. Zinc plating.

For use when you want to use square drive with production, but need the option to withdraw with phillips screw driver in the field. Flat head with nibs, has wide spaced angled threads with Quadrex™ (Phillips/Square) drive. Nibs under head, cut a smooth recess. Type 17 (auger) point eases pressure inside wood.
Available In: Black Oxide or Zinc plating.		 These fasteners are quality deep thread Pan Heads that range from 1/2” to 2” in length.
Available In: Phillips Drive, Black Oxide plating.

Deep, wide spaced, angled threads for use in particleboard or MDF for hinge and drawer slide applications. Eliminates time consuming problem of “Spin-out”.
Available In: Phillips or Square Drive. Black Oxide, Zinc, Nickel, Antique Brass, and Bright Brass platings.		 For RTA furniture applications. This fastener has a gimlet (sharp) point and nibs located right underneath the head.
Available In: #3 Pozi Drive, Zinc plating.

Just like the LITTLE GRIPPER but with a #7 head on a #6 body.
Available In: Phillips or Square Drive. Nickel and Zinc plating.		 Finishing screw, with its small head, is ideal for practically hiding the appearance of a fastener.
Available In: Phillips or Square Drive and Black Oxide plating.

Phillips drive and Twin Fast threads for positive insertion. Case hardened to prevent breakage.
Available In: Phillips Drive, Flat or Oval head. Antique Brass plating.		 Designed for use in European hardware cabinetry. All Euros come in metric widths and lengths.
Available In: Pozi Drive, Nickel Plating.

Cabinet face framing screws for hardwoods and softwoods. All have built up #7 Pan Heads with type 17 (auger) points which eliminates wood splitting.
Available In: Phillips, Square and Quadrex™Drives. Black or Plain and Waxed in either coarse or fine threads.		 Special dual thread design makes for easy insertion. Unique knurled upper shaft lessens resistance from the wood as the screw is torqued down.
Available In: Phillips Drive, Yellow Zinc Plating.

Made of 305 Stainless Steel. They’re all weather Bugle Heads that come with a square drive, deep threads and a type 17 (auger) point. Ideal for use in outdoor applications such as decking, outdoor furniture and cabinetry .
Available In: Square Drive.
Combo Truss Machine Screws for attaching drawer pulls and decorative hardware to drawer fronts and cabinet doors from 8-32 x 7/8” up to and including 8-32 x 1 3/4.”
Available In: Phillips/Slot Combo drive Zinc Plating.

Designed for mounting cabinets. This screw offers type 17 (auger) point and wide threads.
Available In: #2 Phillips or Square Drive. Black, or Nickel plated. White painted heads in stock. Other painted heads available upon request to match cabinets. 		Plastic cover caps for Square and Phillips drive in a wide range of colors. The Fastcaps which are self-adhesive cover caps in PVC and wood veneer in a wide range of colors,

Finely threaded bugle head screw has extra sharp points that penetrate light gauge metal studs. Twin fast threads give rapid penetration and extra holding power.
Available In: Phillips or Square Drive. Black Oxide Plating.		 Designed for use in Corian®. Sink mounting clip kits for mounting sinks. The set consists of a clip, a machine screw and a brass insert.
Washer and wingnut available upon request.

Replaces old-style bolt-nut-washer assembly. Unthreaded portion of the shank draws cabinets together smoothly. Type 17 (auger) point eliminates wood splitting and need to predrill in hardwood applications.
Available In: Phillips or Square Drive. Black Oxide Plating.		 3 1/2” carriage bolt with nut and washer assembled. Used in templates to draw countertops securely together.

The Super Sinker 17® plated with a special all weather Xylan coating. Excellent for outdoor deck construction.
Available In: Quadrex™ (Ph/Sq) drive.		 Insert and Power bits are extra hard from 1” to 6” lengths.
Available In: Phillips, Square, Quadrex™ and Pozi Drives.